|Characteristics:||Single component basecoat with metallic, especially silver and pearl effect, made from weathering resistant resins, high quality, strong coverage power, and excellent adhesion power.|
Sand and clean the substrate (old paint film or 1K, 2K primer) with EC-5910 Degreaser
With sanding paper P600-P800 for wet sanding, and P400-P600 dry sanding.
Metallic Basecoat: Reducer = 1: 0.6-0.8
Mix with EC-5520 1K Binder or EC-5530Flip Controller to speed up air drying time, enhance the orientation ofmetallic particles, and improve property in application.
Add EC-5960 Retarder Solvent when temperature is over 30℃ (54℉).
|Spray Gun||Gravity feed: 1.2-1.4mm; HVLP: 2.0 bar|
Spray 2-3 coats, total should be 15-25μm
5-10flash-off time at 20℃ between coats.
After spray, 10 -15 minutes’ air dryingbefore spraying clear coat.
Professional mix and spray techniques can prevent defects of poor metallic effect s and mottling.
Spray too thick or air drying too long might cause poor adhesion.