|Characteristics:||Double pack, it features smooth paint film and good gloss with durable resistance to weather and pollution.|
|Surface cleaning:||Remove containments and clean the substrate (1K basecoat) with EC-5910 Degreaser.|
|Mixing ratio:||Clear Coat: Activator: Reducer = 2 : 1 : 0-0.1|
|Spray Gun||Gravity feed: 1.2-1.4mm; HVLP: 2.0 bar|
Spray 2-3 coats, total should be 40-60μm
Drying time: 20 ℃, 45 mins; 60 ℃, 30 mins.
For temperature lower than 15℃, recommend full bake at 60℃.
Apply EC-5920 Thinner SRA directly on the overspray areas to achieve a natural transition.
Add 0.5-1% EC-5930 Anti Silicon in the paint remained and re-spray affected areas to solve fisheyes.
Add EC-5960 Retarder Solvent when temperature is over 30℃ (54℉) to avoid blushing.
If runs happen, sand with P1200-P2000 sand paper after thorough drying and then polish.