|Characteristics:||Single component basecoat with metallic, especially silver and pearl effect, made from weathering resistant resins, high quality, strong coverage power, and excellent adhesion power.|
Sand and clean the substrate (old paint film or 1K, 2K primer) with EC-5910 Degreaser
With sanding paper P600-P800 for wet sanding, and P400-P600 dry sanding.
Metallic Basecoat: Reducer = 1: 0.6-0.8
Mix with EC-5520 1K Binder or EC-5530Flip Controller to speed up air drying time, enhance the orientation ofmetallic particles, and improve property in application.
Add EC-5960 Retarder Solvent when temperature is over 30℃ (54℉).
|Spray Gun||Gravity feed: 1.2-1.4mm; HVLP: 2.0 bar|
Spray 2-3 coats, total should be 15-25μm
5-10flash-off time at 20℃ between coats.
After spray, 10 -15 minutes’ air dryingbefore spraying clear coat.
Professional mix and spray techniques can prevent defects of poor metallic effect s and mottling.
Spray too thick or air drying too long might cause poor adhesion.
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.