|Characteristics:||Fast drying 2K topcoat for general vehicles and automobile cars, features good leveling, hard paint film, brilliant gloss, bright and durable color.|
|Surface cleaning:||Sand and clean the substrate (old paint film or 1K, 2K primer) with EC-5911 Degreaser |
With sanding paper P600-P800 for wet sanding, and P400-P600 dry sanding.
|Mixing ratio:||2K topcoat: hardener: reducer = 2 : 1 : 0.1-0.4 |
Mix with EC-5520 1K Binder or EC-60 Flip Controller to speed up air drying time, enhance the orientation of metallic particles, and improve property in application.
|Spray Gun||Gravity feed: 1.2-1.4mm; HVLP: 2.0 bar|
|Spraying||Spray 2-3 coats, total should be 40-60μm|
Drying time: 20 ℃, 45 mins; 60 ℃, 30 mins. After spray, 15 -20 minutes’ air drying before hearting.Apply EC-5920 Thinner SRA directly on the overspray areas to achieve a natural transition.
|Defects preventing||Add 0.5-1% EC-5930 Anti Silicon in the paint remained and re-spray to avoid and solve fisheyes.|
Add EC-5960 Retarder Solvent when temperature is over 30℃ (54℉) to avoid blushing.
If runs happen, sand with P1200-P2000 sand paper after thorough drying and then polish.
1. Basic Information of Spray Paint
7CF, ODM or OEM
Normal Can Size
65mm D x 158mm H
Normal Can Volume
Matt black/lacquer/white, red-brown gold, gold, bronze gold, fluorescent red/pink/green/yellow/orange yellow/violet, and other chameleon color series.
2. Spray Paint’s Pictures
3. Spray Paint's Features
a) Excellent decorative effect with many of optional colors or customized colors;
b) Excellent coverage and adhesion;
c) Easy and quick spray and minimize loss;
d) Fast drying (surface dry time: 10minutes);
e) Excellent protection against rust, impact, UV etc;
f) Glossy or matter finish.
PS: The following color card is for your reference and we could produce customized colors.
4. Usage for Spray Paint
a). Clean surface thoroughly, removing all dirt, grease, oil, wax, rust, moisture etc. Cover adjacent areas to protect from spray mist. Use at room temperature up 70°F.
b). Shake can vigorously for about 30 seconds before spraying.
c). On previously painted surface test spray in a small inconspicuous area.
d). Hold the can 15-25cm from the surface to be sprayed.
e). Press spray button firmly with steady even strokes while moving can rapidly back and forth.
f). 2 to 3 films with 20-30µm thick are better. Intermittence of 10 minutes between each film is recommended.
g). After use, turn can upside down and depress valve button for several seconds to clear valve until only gas emerges so as to prevent clogging.
5. Health & Safety Precautions
a) Keep in ventilated cool and dry places.
b) Do not clash, puncture, or incinerate the can.
c) Keep out of the reach of children.
d) If eye contact, immediately flush eye with plenty of clean water and seek medical advice.
e) If skin contact, flush skin with running water (and soap if available) and seek medical attention in the event of irritation.
a) With an experience more than 20 years in spray paint field;
b) The first and unique public listed company in China’s aerosol field;