|Characteristics:||Fast drying 2K topcoat for general vehicles and automobile cars, features good leveling, hard paint film, brilliant gloss, bright and durable color.|
|Surface cleaning:||Sand and clean the substrate (old paint film or 1K, 2K primer) with EC-5911 Degreaser |
With sanding paper P600-P800 for wet sanding, and P400-P600 dry sanding.
|Mixing ratio:||2K topcoat: hardener: reducer = 2 : 1 : 0.1-0.4 |
Mix with EC-5520 1K Binder or EC-60 Flip Controller to speed up air drying time, enhance the orientation of metallic particles, and improve property in application.
|Spray Gun||Gravity feed: 1.2-1.4mm; HVLP: 2.0 bar|
|Spraying||Spray 2-3 coats, total should be 40-60μm|
Drying time: 20 ℃, 45 mins; 60 ℃, 30 mins. After spray, 15 -20 minutes’ air drying before hearting.Apply EC-5920 Thinner SRA directly on the overspray areas to achieve a natural transition.
|Defects preventing||Add 0.5-1% EC-5930 Anti Silicon in the paint remained and re-spray to avoid and solve fisheyes.|
Add EC-5960 Retarder Solvent when temperature is over 30℃ (54℉) to avoid blushing.
If runs happen, sand with P1200-P2000 sand paper after thorough drying and then polish.
Spray Paint FAQ
1. IS THIS GOOD FOR PLASTIC?
Yes. It also can apply to wood, metal, plastic, rubber materials and etc.
2. CAN THIS BE USED TO PAINT GLASS?
Yes, you can be using a paint designed for glass.
3. CAN THIS BE USED IN GRAFFITI?
4. IS THIS RAIN AND CAR WASH RESISTANT?
5. WILL THIS COVER RUST?
Yes, it can paint for metal with rust and have been successful.
6. CAN I USE THIS TO PAINT MY REFRIGERATOR?
Yes, make sure you thoroughly clean and scuff up the surface to be painted to ensure good paint adhesion.
7. WILL THEY SHINE ON METALS?
Yes, very shiny.
8. CAN I USE THIS ON ARTS AND CRAFTS FOAM?
Yes, you can.