|Characteristics:||Give excellent rust proofing for bare metal, good adhesion power to steel, aluminum and galvanized |
steel. Good resistance to salt and impact.
|Pre-treatment:||Dry and Sand and clean the existing finishes, steel, iron and glass fiber reinforced plastic|
|Mixing ratio:||Epoxy Primer : Hardener : Thinner = 100 : 20 : 20-30|
|Spray Gun||Gravity feed: 1.4-1.8mm; 3-5kg/cm²|
|Spraying||Spray 2-3 coats, total should be 40-60μm|
Drying time: 18-26 hours at 20 ℃; 60-80 minutes at 60 ℃
When the temperature is 10 ℃ lower, recommend to bake at 60-70 ℃ for 30 minutes.
Dry Sanding: P240-P400 Wet Drying: P600-P800
After drying and sanding, re-coat with putty, primer, primer surface and all kinds of topcoat
|Note||For oxidized iron and cast iron, shot blasted sa 2.5class with roughness of 30-75 μm, or acid wash |
the oxidized parts to get rid of rust.
Choose right hardener and thinner to avoid poor curing of paint film.
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.