|Characteristics:||Give excellent rust proofing for bare metal, good adhesion power to steel, aluminum and galvanized |
steel. Good resistance to salt and impact.
|Pre-treatment:||Dry and Sand and clean the existing finishes, steel, iron and glass fiber reinforced plastic|
|Mixing ratio:||Epoxy Primer : Hardener : Thinner = 100 : 20 : 20-30|
|Spray Gun||Gravity feed: 1.4-1.8mm; 3-5kg/cm²|
|Spraying||Spray 2-3 coats, total should be 40-60μm|
Drying time: 18-26 hours at 20 ℃; 60-80 minutes at 60 ℃
When the temperature is 10 ℃ lower, recommend to bake at 60-70 ℃ for 30 minutes.
Dry Sanding: P240-P400 Wet Drying: P600-P800
After drying and sanding, re-coat with putty, primer, primer surface and all kinds of topcoat
|Note||For oxidized iron and cast iron, shot blasted sa 2.5class with roughness of 30-75 μm, or acid wash |
the oxidized parts to get rid of rust.
Choose right hardener and thinner to avoid poor curing of paint film.